Reliable Supplier Welcome to Place an Order Rvss Soft Start for AC Motor

Product Description

 

Product Description

VH10 series motor soft starter   soft starters

No contactor required, small volume,easy transportation and installation,reduce the shipping cost.

We strongly recommend VH10 type of motor soft starter for small power motor (especially for 5.5/7.5/11/15/18.5/22/30/37KW motor)

This series motor soft starter is a new type start-up equipment which integrates electric force and electronic techniques,computer technique and modern control -theory.

It is the new generation product to replace the conventional Star-delta Starter,

Self-coupling voltage-drop Starter and Magnetic control voltage-drop Starter.

Our motor soft starters are widely used in thermal power generation, hydropower, transmission and distribution equipment, metallurgy, chemical industry, mining, construction and other industries.

The compressor uses current limiting to realize smooth start, reduce motor heating and prolong service life. The belt conveyor realizes smooth and gradual starting process through soft starting to avoid product movement and material overflow.

Make the field and environmental conditions

Item			VH10 Online motor soft starter  soft starters
Input Power Supply		Input Voltage	Three-phase 380V  ± 15%
		Frequency	50/60Hz
Adaptive Motor			Squirrel-cage three-phase asynchronous motor
Starting Times			It is recommended not to exceed 20 times per hour.
Control Mode			1) Operation panel control; 2) Operation panel + external control; 3) External control; 4) External control + COM control; 5) Operation panel + external + COM control; 6) Operation panel + COM control; 7) COM control; 8) No start or stop operation.
Start Mode			1) Current-limiting start; 2) Voltage ramp start; 3) Kick start + current-limiting start; 4) Kick start + voltage ramp start; 5) Current ramp start; 6) Voltage current-limiting double closed-loop start.
Stop Mode			1) Soft stop; 2) Free stop.
Protective Function			1 Open loop protection for external instantaneous stop terminals; 2) Over-heat protection for soft starter; 3) Protection for too long starting time; 4) Input open phase protection; 5) Output open phase protection; 6) Unbalanced three-phase protection; 7) starting over current protection; 8) Running overload protection; 9) Under voltage protection for power voltage; 10) Over voltage protection for power voltage; 11) Protectionfor fault parameter setting; 12) Load short circuit protection; 13) Auto restart or incorrect wiring protection; 14) Incorrect wiring protection of external control stop terminals.
Ambient	Place to be used		Indoor location with good ventilation free from corrosive gas and conductivedust.
	Altitude		Below 3000M. It have to rise the rate power when the altitude is more than 3000M.
	Ambient Temperature		-30~+55 C
	Ambient Humidity		≤90%RH without dew condensation.
	Vibration		<0.5G
Structure	Protection Class		IP20
	Cooling Pattern		Natural wind cooling.

 

Product Parameters

Detailed Photos

Application

Pump: make use of soft stop function to relieve the influence of water hammer so as to save system maintenance cost.
Ball mill: make use of voltage ramp startup to reduce gear torque friction so as to save cost and time.
Fan: reduce belt friction and mechanical conflict to save maintenance cost.
Compressor: make use of current limitation function to realize smooth startup so as to reduce motor heating and prolong its service life.
Conveyor: make use of soft start to realize smooth and gradual startup process in order to avoid product move and liquid overflow.
Electric motor/Water storage/Ventilator/Food mixer/Air compressor/Conveyors/Stone crusher/Pulverizer/Heavy-duty machinery and equipment

Installation Instructions

 

 

No.	Function	Setting range	Default value	Permission	Mod bus address
F00	Control mode	0: Keyboard control 1 : External control 2: Communication control 3:Keypad + external control 4: Keyboard ten communication 5: external control ten communication 6: Keyboard 10 communication + external control	1 : External control	Read-write	0
F01	Starting mode	0: Voltage ramp start 1 : Current limiting start	0: Voltage ramp start	Read-write	1
F02	Starting current limit value	50%~600%	3	Read-write	2
F03	Percentage of starting voltage	30%~80%	0.3	read-only	3
F04	Starting time	1s~120s	10S	read-only	4
F05	Soft stop time	Os~60s	0S	Read-write	5
F06	Starting overcurrent protection current	50%-601% 601%indicates closure	5	Read-write	6
F07	Starting overcurrent protection time	0~120s	2s	Read-write	7
F08	Running overcurrent protection current	50%-601% 601%indicates closure	2	Read-write	8
F09	Running overcurrent protection time	0~999s	2s	Read-write	9
F10	Undercurrent protection current	10%~100% 100% indicates closure	0.5	Read-write	10
F11	Undercurrent protection time	0~120s	5s	Read-write	11
F12	Unbalance degree	20%~100% 100% indicates closure	0.4	Read-write	12
F13	Unbalance protection time	0~120s	5s	Read-write	13
F14	Overvoltage protection multiplier	100%~140% 100% indicates closure	1.2	Read-write	14
F15	Overvoltage protection time	0~120s	5s	Read-write	15
	Undervoltage protection times	50%-100% 100%indicates closure	0.8	Read-write	16
F17	Undervoltage protection time	0~120s	5s	Read-write	17
F22	Motor rated current	1~500A	30A	Read-write	20
F23	Address	1~64	1	Read-write	21
F24	Baud rate	0: 2400 1: 4800 2: 9600 3:19200	2:  9600	Read-write	22
F25	Software version			read-only	23
U0	Main control software version			read-only	100
U1	Soft start status	0: Standby 1 : Soft Start 2: Run 3: Soft Stop 5: Fault			101
U2	Current Fault	0: No fault 1 : Input phase loss 2: Output phase loss 3: Starting overcurrent 4: Running overcurrent 5: Undercurrent 6: Current unbalance 7: Phase sequence protection 8: Soft start overheat protection			102
U3	Average Output Current				103
U4	Input Voltage				104
U5	A-phase current				105
U6	B-phase current				106
U7	C-phase current				107
U8	Three-phase unbalance				108
U9	Power Supply Phase Sequence				109
U10	Soft start temperature switch status				110
U11	Percentage of Starting Completion				111
	First fault record				200
	Second fault record				201
	Third fault record				202
	Fourth fault record				203
	Fifth failure record				204
	Sixth failure record				205
	Seventh failure record				206
	Eighth failure record				207
	Ninth failure record				208
	Tenth failure record				209
	Eleventh failure record				210
	Twelfth failure record				211
	Start-stop order	0x0001 start 0x0002 stop 0x0003 Fault reset 0x0030 Restore factory values 0x0031 Clear Fault			300

 

Company Profile

Zhejiang Lingshine Electric Co., Ltd (Aigoodele), is a high-tech enterprise integrating production, sales and service. Our main products are soft starters,frequency converter (VFD), soft starter (LSRQ), solid state relay (SSR), solid state voltage regulator (LSCR), high power rectifiers and so on (KP, ZP, MTC, MDS, MDQ, MDC, MDK, ETC). These products have been widely used in energy, petroleum, metallurgy, chemical industry, construction, plastics, textile, water supply, paper making, mining, printing and many other industrial fields. In addition, our products not only perform well in the domestic market, but have also been exported to dozens of countries and regions in Asia, Africa, Europe and other continents, winning wide international recognition.
We look forward to cooperating with every customer, welcome your guidance and suggestions, and work together to create a more brilliant future.

FAQ

Q1.Can you provide price sheet and catalog to me ?
We are pleasure to provide these to you for reference,you can cotact me,give me your emails ID.

Q2.Can I get some samples?
Yes,Sample order is available for quality check and market test .but you need to pay the sample fee and shipping cost

Q3.How long is your lead time?
2-3 days for the stocks items, mass production generally needed 1-2 weeks.

Q4.What's your payment terms?
We usually accept all kinds of payment terms.Such as T/T,L/C,Western Union.Cash.

Q5.What's your warranty terms?
We offer 12 months warranty time.

Q6.Do you have the products in stock?
Depends on your request,We have standard models in stock.Some special products and big order will be newly produced according to your order.

Q7 How about your payment and shipment?
Payment: We accept  T/T, Western Union, Paypal, Cash etc.
We usually ship via DHL, UPS, FedEx or TNT, SF for small order and via ocean for bulk order according to your requirement.

Q8.How does your factory do the quality control?
Quality is priority,we always attach the importance to quality control from the beginning to the end of the production.every product will be fully assembled and carefully tested before packing and shipping.